Payment & Shipping Terms:
Chamfered Ends Plain Bearing Bush 10X30 Bronze Shaft Bushings for Axle Bearings
Shaft bushing is also known as a bush or a sleeve and used for axle bearing or plain bearing to prevent it from wearing and extend service .
Shat bushings are in stationary condition for axle bearings or plain bearings that are inserted to it , between shaft bushing and bearing will be happened much friction when bearings are rotating , so the touched area of shaft bushings and bearings must to be applied lubricant to reduce friction .
Shaft bushings are made of bronze material for plain bearing with perfect performances .
B Low friction
C Low wear
D Resistant to high temperatures
E Corrosion resistant.
F High load-carrying capacity
Shaft bushings with a number of specifications for different axle bearing applications in industry . we can offer standard sizes from 4 to 300 mm diameter and length 100 mm , we are also available for oversize of 100 mm
Tolerance for above different lengths
Tolerances for Shaft Bushings
Normally, both ends of Shaft bushings are with chamfer for free of scratching during installation and operation .
|T||Outside Chamfer||Inside Chamfer|
Shaft bushings are widely used to various fileds with bearing operations .
★ Truck and Car
★ Sport equipments
Bronze Shaft bushings normally are not to be plated , but sometimes to be plated for improving performance on wear resistance
The most popular plating for the most products , making parts are bright and smooth and resistant corrosion
The film thickness is 1～3μm , it improves brightness and wear resistance .
Reduce roughness of parts and improve brightness .
With film thickness 0.13～1.27μm , tin finish with bright surface and good ductility ,corrosion resistance ,lower melting point ,eco-friendly features .