Flange copper sleeve fluid film lubrication for automotive machinery.
The bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection, etc. It refers to the ring sleeve that functions as a gasket. In the field of valve applications, the bushing is inside the valve cover, and corrosion-resistant materials such as polytetrafluoroethylene or graphite are generally used for sealing.
Between the two friction surfaces, it is completely separated by the fluid film of the lubricant, and the external load is balanced by the pressure of the fluid film, so that the movement friction of the two friction surfaces becomes the internal friction of the fluid, which is called fluid film lubrication. Fluid film lubrication is an ideal lubrication state.
There are two ways to form fluid film lubrication, one is hydrostatic lubrication, and the other is hydrodynamic lubrication.
Hydrostatic lubrication: is to inject a certain pressure of liquid lubricant into a special cavity between two friction surfaces, and then the lubricant overflows through the surface gap around the cavity to form a fluid film static pressure between the two friction surfaces. Separate the two friction surfaces to achieve hydrostatic lubrication. This method is suitable for the lubrication of hydrostatic bearings or parallel low-speed movement of two friction surfaces, and is not suitable for the lubrication of point-line and other high pair contact, such as the lubrication of gear transmission.
Hydrodynamic lubrication: liquid lubricant is injected into the entrance of the two friction surfaces. The relative movement speed between the two friction surfaces draws the lubricant into the working area of the friction surface to generate dynamic pressure, forming a fluid dynamic pressure to separate the two friction surfaces. , Realize hydrodynamic lubrication. This method is suitable for the lubrication of conjugate friction surfaces with a certain speed of movement. Therefore, it is suitable for the lubrication of gear transmission.
|Product name||Flange copper sleeve fluid film lubrication for automotive machinery|
|Load direction||Radial thrust|
|Oil lubrication method||oil pad lubrication|
|Lubrication status||Fluid film lubrication|
|Drawing Format||DWG/DXF/IGS/STEP/X-T and PDF|
|Service||OEM ODM Customised|
1Q:What information does the quotation need?
A:Pls. offer your drawings and/or samples, quantity and packing’s requirements.
Drawings in PDF, IGS, DWG, STEP, MAX are suitable to us.
2Q:What’s lead time for samples and products?
A:Lead time for samples: 30-70days depend on the structure of the part and other requirements on heat treatment, machining, surface
treatment and so on.
Mass production lead time: 35-70days depend on products’ characteristics and quantity.
3Q:What is the requirement on payment?
Tooling Cost:50% deposit,50% after samples passed.
Payment for the Order:50% deposit,50% to be paid before shipment.